230v 2000w Half White Coating Infrared Quartz Heat Lamp With Ce Certification for Pet Blowing Machines on IR Heating UV

1020mm 2000w quartz halogen heat lamp quartz paint drying lamp

Sun, 19 Jul 2026 02:53:33 +0800

Let’s talk about the 1020mm 2000W Quartz Halogen Lamp

If you’re running high-intensity drying or curing lines, you know the struggle of getting heat exactly where it needs to be. That’s why we built this lamp. It’s a meter long, packs 2000W of punch, and uses short-wave infrared (SWIR) to get the job done. Unlike old-school convection heat that just warms the air, this stuff dives straight into paint layers and coatings. It’s faster. Much faster. Getting the heat right The 1020mm length is a sweet spot. It lets you cover wide belts or big parts without those annoying cold spots that ruin a finish. Since we’ve dialed it to 2000W, you get the kind of heat density that flashes off solvents in a heartbeat. The heat stays consistent across the whole tube, but here’s a pro tip: check your wiring. If your power supply can’t handle the draw, you’ll see voltage drops at the ends of the lamp, and that’s a headache you don’t want. The secret is in the glass We use high-purity quartz for the envelope. Why? Because it can take a massive thermal shock and won’t warp when things get blistering hot. Inside, there’s a halogen cycle happening. It stops the tungsten filament from evaporating and gunking up the walls. This keeps the glass crystal clear so the light actually gets through. But be careful.**One fingerprint or a smudge of oil on that quartz can kill the lamp.**It creates a hot spot, the glass stresses, and then it pops. Seriously, grab some isopropyl alcohol and wipe it down before you wire it up. Real-world use You’ll see these all over PET blowing and paint shops. Because the radiation hits the part directly, your pieces spend way less time in the oven. Just keep in mind that 2000W in a small tube creates some serious heat. Make sure your oven housing and fans are up to the task. You don’t want your reflectors warping or your electronics frying just because the lamp is doing its job too well.

500mm 220v 1000w Halogen Heating Lamp

Mon, 08 Jun 2026 01:38:06 +0800

The 500mm 220V 1000W Halogen Heating Lamp: Power That Fits

We built this 500mm, 220V, 1000W halogen heating lamp for engineers who just want dependable infrared heat—without rearranging the whole machine. It’s the kind of heat source you can drop in and trust, especially when your process needs fast response and steady temperature control.

Power, voltage, size—kept simple

At 1000W running on 220V, this lamp gives you repeatable heat with a load your control circuit can plan around. No surprises. The 500mm length spreads the heat across a clear, defined zone, so you can match the heated area to the part you’re working on. You get plenty of power density for most heating stations, and because it’s 220V, wiring fits right into standard plant power—no overcomplicating things.

Halogen Lamp Replacement Parts for PET Blowing Machine

Sun, 03 May 2026 17:36:09 +0800

Introduction

Let’s cut to the chase. We make replacement parts for the heating zones of PET blowing machines. These aren’t just your average bulbs. They’re purpose-built components, engineered to deliver one thing: fast, focused heat right where you need it, to get those preforms ready for the next step. The whole point? Keeping the melt temperature perfectly even across the preform. That way, you get a stretch and a blow that are consistent every single time. No surprises. Just smooth, reliable performance.